Cres Cor H137WSRR-C Series Panduan Petunjuk Pengoperasian dan Pemeliharaan - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian dan Pemeliharaan untuk Kulkas Cres Cor H137WSRR-C Series. Cres Cor H137WSRR-C Series 12 halaman. Companion holding cabinet
Juga untuk Cres Cor H137WSRR-C Series: Panduan Petunjuk Pengoperasian dan Pemeliharaan (12 halaman)
Halaman Cetak
Companion
FL-2330
Holding Cabinet
Rev. 0 (2/07)
Page 2 of 10
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H137WSRR-C Series Companion Holding Cabinet
HOW TO INSTALL UNIT:
1.
Remove all paper and packing material from inside of
cabinet.
2.
Remove protective paper and vinyl material from
outside surfaces of cabinet.
3.
Place the cabinet in a well-ventilated area.
4.
Place cabinet on level fl oor. (For cabinets with legs,
adjust the legs of the cabinet to ensure proper fi t of rack
into cabinet. See Fig. 1)
5.
Plug cord end into proper wall outlet.
6.
Fill water pan with 4 gallons (15 liters) of water.
Make sure green drain valve is closed. See Figure 2.
operation and to maintain warranty.
7. Push POWER switch to "ON." Yellow POWER
LIGHT will come on.
8. Push the "SET" button on the TEMPERATURE
CONTROL. The TEMPERATURE DISPLAY will
show "SP1" (set point 1).
9. Press "SET" again and the current set point temperature
will be displayed.
10. Press the
ADJUST buttons to adjust to 200°F
(93°C).
11. Run the unit for one hour.
NOTE: DO NOT PUT FOOD IN CABINET!
This step is to burn off manufacturing oils and excess
adhesive.
WARNING
Air is VERY HOT when door is opened.
12. Let the cabinet cool and wipe inside clean with
detergent and hot water before fi rst use.
Use of treated or
soft water may be
required for proper
5925 Heisley Road • Mentor, OH 44060-1833
Figure 1 Leg Adjustment
Figure 2 Drain Valve