Fiamm Motive Power Life iQ Panduan Pengguna

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengisi Daya Baterai Fiamm Motive Power Life iQ. Fiamm Motive Power Life iQ 4 halaman. Modular

Halaman Cetak

Instructions for use Fiamm Motive Power

SafEty INStructIoNS

aIM of tHIS MaNuaL

This manual is designed for use by any skilled worker wishing

to use Fiamm Motive Power

chargers for recharging lead/acid vented, (with or without

electrolyte mixing), valve regulated AGM and gel batteries.

This manual provides details of:

•

The chargers' functions.

•

Any adjustments required and how to use the chargers.

When producing this manual, EnerSys

its information in as simple and precise a manner as possible

but cannot assume any responsibility for any misinterpreta-

tion. The owner of the equipment is required to retain this

manual throughout the equipment's life and to pass it on to

any purchaser in the event of its resale.

The manufacturer covers the guarantee in accordance with

the local regulations (contact local sales organization).

Recommended use

This manual should be read through carefully before using

the equipment and also read by anyone likely to use the

equipment.

The equipment:

•

Presents no obstacles to the free circulation of air through

the air inlet and outlet but, nevertheless, should be cleaned

of dust every six months by a qualified person.

•

Must be used in conformance with its indicated level of

protection and never come into contact with water.

•

Must be used within the temperature limits stated in the

technical characteristics.

•

Must not be installed on surfaces subject to vibration (near

to compressors, engines, motors).

•

Must be installed so that the gases from the battery being

charged, do not get sucked into the charger by its fan.

Operator safety

Take all necessary precautions when the equipment will

be used in areas where there is the possible risk of an

accident occurring. Ensure appropriate ventilation according to

standard DIN EN 50272-3 to allow any gases released to

escape. Never disconnect the battery while it is being charged.

ELEctrIcaL SafEty

The prevailing safety regulations must be observed. The sys-

tem protection installed on the power supply to the charger

must conform to the charger's electrical characteristics. The

installation of a suitable circuit breaker is recommended. It is

imperative to ensure that when fuses are being replaced only

fuses of the specified type and of the correct are used. It is

strictly forbidden to use inappropriate fuses or to short-circuit

the fuse holders. This equipment conforms to Class 1 safety

standards, which means that the appliance must be earthed

and requires to be powered from an earthed supply.

Never open the equipment: High voltage could be still present

even turning off the charger.

Any adjustment, maintenance or repairs to the equipmen-

while it is open must only be carried out by an appropriately

skilled person who is aware of the risks involved.

Contact one of the company's trained technicians if any prob-

lem is encountered when putting the charger into operation.

This equipment has been designed for indoor use. It is only

designed to recharge lead/acid batteries on industrial premises.

When the equipment becomes obsolete, the casings and the

other internal components can be disposed of by specialist

companies. Local legislation takes precedence over any inst-

ructions in this document and must be scrupulously observed

(WEEE 2002/96 EC).

EnerSys reserves the right to make any improvements and/or

modifications to the product described in this manual at any

time and without prior notice and is not obliged under any

circumstances whatsoever to update the contents of this

manual nor the equipment concerned.

The equipment's production number must be supplied when

requiring a service.

Life iQ

Modular battery

has aimed to provide

Modular

If the charger is to be stored before its use, it must be

kept carefully sealed in its original packaging. It must be

stored in a clean and dry location at a moderate tempera-

ture (-20°C to +40°C). Equipment stored at a temperature of

less than 15°C must be brought progressively to operating

temperature (over a period of 24 hours) to avoid any risk of

condensation causing electrical faults (particularly short-

circuits).

Ec DEcLaratIoN

EnerSys hereby declares that the chargers in the

Life iQ Modular range covered by this declaration

conform to the descriptions laid down in European

Directives:

2004/108/EC:

DIN EN 61000-6-2, DIN EN 61000-6-4: Immunity and emissions

limits for industrial electronics

2006/95/EC:

DIN EN 60950, DIN EN 60335 (Low Voltage Directive)

RoHS 2011/65/EC

ENGLISH