AccuScreens WALL/PORTABLE PROJECTION SCREENS Petunjuk Perakitan/Pemasangan - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Perakitan/Pemasangan untuk Layar Proyeksi AccuScreens WALL/PORTABLE PROJECTION SCREENS. AccuScreens WALL/PORTABLE PROJECTION SCREENS 12 halaman. Fixed wall/portable projection screens

Halaman Cetak

• Find a clean surface to work on.

• Place frame pieces face down on the clean work surface

(so the extrusions are facing up).

• The frame pieces are labeled 1-8. Starting with No. 1,

follow the numbers clockwise and connect frame pieces

together. Hand tighten the screws.

• Remove viewing surface from protective pouch and

spread out over the frame so that the vinyl strip is facing

down.

• Attach the corners of the viewing surface to the corners

of the frame using the velcro straps.

• Finish attaching viewing surface to frame by inserting

the vinyl strips along all four sides into the fabric retainer

extrusions on the frame.

LABELING OF SCREEN FRAME PIECES

PORTABLE MOUNTING

USING OPTIONAL LEG KIT

• Extend the center support to the correct height and

place it in the center of the screen frame. This will

provide additional tension to the center of the frame

and prevent sagging.

• Mount the legs to the back of the screen frame using

pre-mounted attachment brackets.

• Place plastic octagonal feet on the floor, and insert

aluminum legs into plastic octagonal feet.

ASSEMBLY

Velcro

Strap

Velcro

Strap

Fabric

Vinyl

Strip