Crescent SC250 Panduan Pemecahan Masalah - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pemecahan Masalah untuk Scrubber Crescent SC250. Crescent SC250 2 halaman.
Juga untuk Crescent SC250: Panduan Pemecahan Masalah (2 halaman)
Halaman CetakATTENTION! Do not use the machine before you have read and understood the Instructions for use manual
The machine
doesn't work
as it should?
1. Check if the battery is charged.
The suction
doesn't work
as it should?
1. Check if the recovery tank is full.
The machine
doesn't clean
as it should?
1.
The brushes
don't work as
they should?
1. Adjust the brush pressure by
All manuals and user guides at all-guides.com
2. Check if the battery co
slot. (*)
2. Check if dirt/debris are clogging the
squeegee inlet and if the blades are
worn or damaged.
3. Check if the holes in solution
Clean it if needed.
dispensers are clogged. Remove
them and clean if needed.
2. Check the correct installation and
turning the regulation knob.
the wear of the cylindrical brush.
(*) For these causes the maintenance
procedure must be performed by an
3. Machine fault indicated by Led's
For further information refer to the
blinking. (*)
Service Manual, available at any
3. Rinse the inside of the duct
4.
recovery hose with water.
3. Check if quick connect valve is not
leaking.
3. Check if there are external
materials avoiding brush rotating.
www.crescentindustrial.co.uk
SC250