Crescent SC6500 Panduan Pemecahan Masalah - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pemecahan Masalah untuk Scrubber Crescent SC6500. Crescent SC6500 2 halaman.
Juga untuk Crescent SC6500: Panduan Pengguna dan Pemeliharaan (2 halaman)
Halaman CetakATTENTION! Do not use the machine before you have read and understood the Instructions for use manual
The machine
doesn't work
as it should?
1 Check battery charge gauge.
The suction
doesn't work
as it should?
1 Check if the suction hose is
The machine
doesn't clean
as it should?
1 Check if you have the right water
The brushes
don't work as
they should?
1 Check if the brush are correctly in -
2 Check that the drive pedal is re -
2 Open the recovery tank and check
correctly installed and cleaned.
2 Check if the solution tap is open.
settings.
2 Check if there isn't any brush motor
stalled and not worn out.
3 Check battery cables are well con -
sponding and all circuit breakers are
armed.
3 Check if squeegee blades are
if the vacuum grid and gasket are
cleaned.
3 Check if the solution filter is
3 Check if there are external materials
overload i.e. 3 battery Ledsflash si -
multaneously.
4 Recovery tank seal cover must
nected together.
4 Close the recovery tank cover prop -
damaged or dirty.
cleaned.
avoiding brush rotating.
www.crescentindustrial.co.uk
SC6500
correctly installed and in good
condition.
erly and/or verify the gasket wear.