Cressi AQUAWING PLUS Petunjuk Penggunaan Manual - Halaman 10
Jelajahi secara online atau unduh pdf Petunjuk Penggunaan Manual untuk Instrumen Selam Cressi AQUAWING PLUS. Cressi AQUAWING PLUS 19 halaman. B.c. 's jackets
Halaman Cetak
QUICK-RELEASE ABDOMINAL BUCKLE ADJUSTMENT
To adjust the position of the buckle, proceed as shown in the following figures
(fig. 41-42-43-44-45-46)
41
43
45
SMB POCKET (SURFACE MARKER BUOY)
Use the special pocket, located under the backplate cover, to hold the surface
.
marker buoy (fig. 47)
42
CONTROL UNIT
The control unit is the heart of each BCD, linked to the inflation and deflation
functions of the pneumatic bladder. It consists of the By-Pass, the Corrugated
Hose and the Dump Valve (fig. 53).
44
BY-PASS: The By-Pass is the terminal that houses all the buttons and the
inflation and deflation mechanisms (fig. 51); it must always be within reach, as
it controls all the BCD's vital operations. The low-pressure hose from the 1st
stage is connected to the By-Pass by way of a quick coupling. This allows the
By-Pass valve to blow air into the tank. This valve is designed to operate with
a relative pressure of 1 to 15 bar, but we recommend using it with a relative
pressure of 8 to 12 bar.
46
47
www.cressi.com
EN
48
25