digimess TM10100 Panduan Petunjuk Pengoperasian - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Catu Daya digimess TM10100. digimess TM10100 11 halaman.

3.0

Operating instructions

3.1

Mains input

The mains input connector is located on the rear of the unit. Before connecting to the mains supply the user

should verfy that the unit is set to the correct voltage for the country of use. The mains voltage is set by the

external mains voltage selector switch located on the rear of the unit.

3.2

Mains input fuse

The mains fuse is located on the rear of the unit. The correct fuse for each supply voltage is as follows :

Model

110Vac

TM2450

T30A 250V

TM1580

T30A 250V

TM10100

T25A 250V

3.3

Power on/off

The mains power to the unit is switched on and off using the POWER on/off pushbutton.

3.4

Voltage and current display

TM2450, TM1580 and TM10100 feature independent displays for both output voltage and output current.

3.5

Output terminals

All units have two sets of output terminals. For output currents exceeding 20A the terminals on the rear pan-

el must be used.

3.6

Output voltage and output current

The output voltage is adjusted to the desired value using both the Coarse and Fine Voltage controls. The

output current level is adjusted to the desired value usng both the Coarse and Fine Current controls. If the

output current exceeds the set current value the power supply will limit the output current to the set value.

3.7

Caution

In the event of a short circuit at the output the current will limit at the value set by the current controls, how-

ever the unit should be turned off and the short circuit removed before continuing use.

220Vac

T15A 250V