Diginet LEDsmart+ MMDM RT Manual - Halaman 7

Jelajahi secara online atau unduh pdf Manual untuk Dimmer Diginet LEDsmart+ MMDM RT. Diginet LEDsmart+ MMDM RT 12 halaman. Setup functions

E: Setting Off State Indication

When the dimmer is switched off, the white LED indicators in the dimmer can be set to glow on or turn off.

By Default, the white LED indicators are set to glow on when the dimmer is turned off.

To set the LED indicators to turn off when the dimmer is off, follow the steps below.

Step 1

Enter into the dimmer Setup Mode - See PART A

Step 2

Click the dimmer rotary shaft five times

Step 3

LED will blink 5 times

Note: To cancel/exit do nothing for 30 seconds

Step 4

To set Indicator to glow on when dimmer is off

Adjust the dial Clockwise until the lamp(s) turns ON

To set Indicator to turn off when dimmer is off

Adjust the dial Anti-Clockwise until the lamp(s) turns OFF

Note: To cancel/exit do nothing for 30 seconds

Step 5

Click once to save & exit

Setup Functions - Rotary Dimmer/Switch