DIGINI DDT01K Panduan Pengguna - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor DIGINI DDT01K. DIGINI DDT01K 16 halaman. Digital display

5. Password Setting: Set a user password.

a. Password Setting: If set to on, it will show an input password

window when first operating the machine. The system will be locked

again after three minutes of no usage and you will be required to re-

enter the password.

b. Change Password: Set a new password, the default password is

000000.

c. Password Type: Choose when the password needs to be required.

6. Low-Level Format Disk: Format the local storage completely.

7. Enter PC Update: Update the software by PC.

8. Factory Reset: Reset all of the menu settings back to factory settings.

System Update

Copy update file and the "config.txt" to the U-disk root catalogue, then insert

the U-disk. It will wait 10 seconds, press any key to quit. It takes two minutes

to update, and then the board will restart.

updating.

Do not cut off the power while