digiO2 ETH-102 Buku Petunjuk - Halaman 7

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Termometer digiO2 ETH-102. digiO2 ETH-102 14 halaman. Bt infrared ear thermometer

5.Set up

After inserting the battery, you will see the screen as below, and

the system will enter option mode automatically.

5.1. How to operate :

Set the year, date, time and temperature warning level

according to the instructions.

5.1.1 "Year"(Default year 2011): Press "MEASURE" to

change the number, and press "MENU" to ﬁnish the

setting.

5.1.2 "Date"(Default Jan. 1st): Press "MEASURE" to

change the date and press "MENU" to ﬁnish the

setting.

5.1.3 "Time": Press "MEASURE" to change the time and

press "MENU" to ﬁnish the setting.

* The set-up mode is optional, depending on models.

5.1.4 "Temperature ":Press "MEASURE" to select "

" and press "MENU" to ﬁnish the setting.

˚F

5.1.5 Set "Higher warning level", default 37.8

5.1.6 Set "Lower warning level", default 36

5.2. Operation mode:

5.2.1 Measure body temperature :

‧If the measurement is below 97°F(36.1°C), the screen

backlight shows Green and the device sounds 1 long and

" or

˚C

2 short beeps.

: Press "MEASURE" to change the number and press

"MENU" to ﬁnish the setting.

: Press "MEASURE" to change the number and press

"MENU" to ﬁnish the setting.

Insert the thermometer into ear smoothly and press

"MEASURE" to start. The measurement shows on the

screen after hearing a beep.

(100

)

˚C

˚F

(96.8

)

˚C

˚F