Cisco 2960-48PST-L - Catalyst Switch Lembar data - Halaman 10
Jelajahi secara online atau unduh pdf Lembar data untuk Beralih Cisco 2960-48PST-L - Catalyst Switch. Cisco 2960-48PST-L - Catalyst Switch 21 halaman. Switching portfolio
Juga untuk Cisco 2960-48PST-L - Catalyst Switch: Buletin Dukungan Produk (2 halaman), Lembar data (28 halaman), Deskripsi (1 halaman)
Halaman Cetak
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
QoS and Control
● Standard 802.1p CoS and DSCP field classification are provided, using marking and
Advanced QoS
reclassification on a per-packet basis by source and destination IP address, source and
destination MAC address, or Layer 4 TCP or UDP port number.
● Cisco control-plane and data-plane QoS ACLs on all ports help ensure proper marking on a
per-packet basis.
● Four egress queues per port enable differentiated management of up to four traffic types.
● SRR scheduling ensures differential prioritization of packet flows by intelligently servicing the
ingress and egress queues.
● Weighted tail drop (WTD) provides congestion avoidance at the ingress and egress queues
before a disruption occurs.
● Strict priority queuing guarantees that the highest-priority packets are serviced ahead of all
other traffic.
● There is no performance penalty for highly granular QoS functions.
● The Cisco CIR function guarantees bandwidth in increments as small as 1 Mbps.
Granular Rate Limiting
● Rate limiting is provided based on source and destination IP address, source and destination
MAC address, Layer 4 TCP and UDP information, or any combination of these fields, using
QoS ACLs (IP ACLs or MAC ACLs), class maps, and policy maps.
● Asynchronous data flows upstream and downstream from the end station or on the uplink are
easily managed using ingress policing and egress shaping.
● Up to 64 aggregate or individual polices are available per Fast Ethernet or Gigabit Ethernet
port.
Data Sheet
Page 10 of 21