Cisco 2960-C Panduan Memulai - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Beralih Cisco 2960-C. Cisco 2960-C 25 halaman.
Juga untuk Cisco 2960-C: Panduan Instalasi (37 halaman)

Halaman Cetak

Catalyst 3560-C and 2960-C Switch Getting Started Guide

Connecting to PoE Devices

Step 1

When you connect the 10/100 or 10/100/1000

downlink ports to IP phones, wireless access

points, and so on, connect a straight-through,

twisted four-pair, Category 5 cable to a switch

port.

Step 2

Connect the other cable end into an RJ-45 port on the other device.

Verify Port Connectivity

In Case of Difficulty

OL-23802-02

You can connect the switch to IP devices such as IP phones and access points.

Some switch models can power the IP device, depending upon the surplus power

they have. See the switch hardware guide for information.

After you connect the switch port and another device, the port LED turns amber

while the switch establishes a link. This process takes about 30 seconds, and then

the LED turns green. If the LED turns off, the target device might not be turned

on, there might be a cable problem, or there might be a problem with the adapter

installed in the target device. See the

for information about online assistance.

If you experience difficulty, help is available in this section and also on

Cisco.com. This section includes Express Setup troubleshooting, how to reset the

switch, how to access help online, and where to find more information.

13:02 10/9/00

Re dial

GHI

PQRS

"In Case of Difficulty" section on page 19

Catalyst 3560-C and 2960-C Switch Getting Started Guide

C at al ys

t 2 9 6 0

-C

S er i es

P D

2000

3000

Your current options

New Cal l

CFwdAl l

messages