BYECOLD HH0606L Buku Petunjuk - Halaman 8

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pemanas BYECOLD HH0606L. BYECOLD HH0606L 10 halaman. Infrared heater panel with led light

Halaman Cetak

Step 1. Once in 5+2 mode, Press and hold the SET button for 3-5 seconds until

Program icon ① and MON TUE WED THU FRI is displayed with ON and Time Icon

flashing on screen.

Step 2. Press ▲ button to adjust hour(+1hour/press) and press ▼ to adjust

Minute(+5minutes/press) to set the starting time of Program ①.

Step 3. Press the SET button once and OFF icon flashing on screen, Use ▲ Button

to adjust hour (+1hour/press) and press ▼ to adjust minute (+5minutes/press)

to set the ending time of Program ①.

Step 4. Press the SET button once again and set temperature icon flashing on

screen, Use ▲ or▼ button to set the desired temperature to be maintained for

program ①.

Step 5. Press the SET button to bring up Program ② of week days , repeat Step

2-5. And users can set up Program ③ and ④ in similar manner.

Step 6. After finishing setting Program ④, press the SET button to bring up SAT

and SUN setting, repeat step 2-5 to set Program① ② ③ ④ of weekends.

2) 1-7 Programming Mode

You can program the thermostat everyday with setting 2 groups of time interval

per day.

Once in 1-7 Mode, Press and hold the SET button for 3-5 seconds until Program

icon ① and MON is displayed with ON and Time icon flashing on screen, users

can follow the above step 2-4 to set On/Off time and desired temperature of

Program ① and ② from Monday to Sunday in sequence.

Tips

：

1). The default starting time is 00:00, the ending time is 00:00, and the default

operating temperature is 15 degrees.

2). If the user does not adjust the default On/Off time of 00:00, the programming

settings is invalid.

3). Running time of Program ① ② ③ ④ should not be overlapped, and the

ending time value of each program must be later than the starting time, otherwise

setting is invalid.

4). In 5+2 mode, if you do not want to set a mid-day heating period(Program ②

or ③ ), simply set the programs ② or ③ to a lower temperature than default

with very short intervals. An example is shown below.

5). The programmed time / temperature setting will be restored with the next

program entry in the memory.

6). Once finish setting up the programming mode, the thermostat will work under

programming mode ON even if the thermostat is turned off. The heating device

will be switched ON or OFF according to the programming setting.

Open Window Detection

The thermostat will automatically turn off the heating device if a sudden drop in

temperature in the room is detected.

Operation Instructions of LED Lighting Function

Once thermostat is paired with device, Press ON/OFF button for LED light to

turn on/off the led light surrounding the panel, and long press ON/OFF

button to switch light color (Cold Light—Warm Light—Nature Light if

available).

Press +/- to adjust the brightness, short press can adjust brightness to 100%,

75%, 50% and 25%, long press can adjust from 100% to 5%.

Notes

All settings need to be re-set after battery replacement.

Alkaline battery is recommended. If ALL buttons on the thermostat are not

working, try replacing the batteries.

Please do change the batteries with new ones once the screen battery symbol

gets flashing, or else it may result in halted/stuck/not working.

Check if set temperature is higher enough than room temperature first if the

heating can not be turned on by thermostat.

- 6 -