Cisco 3750 - Catalyst EMI Switch Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih Cisco 3750 - Catalyst EMI Switch. Cisco 3750 - Catalyst EMI Switch 47 halaman. Catalyst 3750 series switches
Juga untuk Cisco 3750 - Catalyst EMI Switch: Lembar data (18 halaman), Faq (10 halaman), Buletin Produk (5 halaman), Buletin Dukungan Produk (6 halaman), Ikhtisar Produk (25 halaman), Deskripsi (1 halaman), Lembar data (23 halaman), Buletin Dukungan Produk (6 halaman), Panduan Memulai (27 halaman), Lembar data (23 halaman), Panduan Memulai (33 halaman)

Chapter 3

Switch Installation

To prevent the switch from overheating, do not operate it in an area that

Warning

exceeds the maximum recommended ambient temperature of 113 F (45 C). To

prevent airflow restriction, allow at least 3 inches (7.6 cm) of clearance around

the ventilation openings.

When installing the unit, the ground connection must always be made first and

Warning

disconnected last.

This equipment is intended to be grounded. Ensure that the host is connected to

Warning

earth ground during normal use.

Do not work on the system or connect or disconnect cables during periods of

Warning

lightning activity.

Warning

Ultimate disposal of this product should be handled according to all national

laws and regulations.

Attach only the Cisco RPS (model PWR675-AC-RPS-N1) to the RPS receptacle.

Warning

Class 1 laser product

Avoid exposure to the laser beam.

Warning

78-15136-01

Catalyst 3750 Switch Hardware Installation Guide

Preparing for Installation

3-3