Digiplex DGP-641ACC Manual Pemrograman - Halaman 2
Jelajahi secara online atau unduh pdf Manual Pemrograman untuk Papan tombol Digiplex DGP-641ACC. Digiplex DGP-641ACC 2 halaman. Access control lcd keypad
Juga untuk Digiplex DGP-641ACC: Manual Pemrograman (2 halaman)
M
P
ESSAGE
ROGRAMMING
Each section from [101] to [249] contains one message with a
maximum of 16 characters. The following are the defaults:
Section [101] to [148] = Zone 01 to Zone 48 respectively
Section [149] to [244] = Code 01 to Code 96 respectively
Section [245] = Paradox Family
Section [246] = First Area
Section [247] = Second Area
Section [248] = Third Area
Section [249] = Fourth Area
After entering the section corresponding to the desired message, it
can be re-programmed to suit the installation needs (see Table 1).
Example: change section [101] "ZONE 01" to "FRONT DOOR".
Table 1: Message Programming
Key
Function
[
]
Insert Space
STAY
[
]
Delete
FORCE
[
]
Delete Until the End
ARM
[
] Numeric/Alphanumeric
DISARM
[
]
Lower/Upper Case
BYP
[
]
Special Characters
MEM
Table 2: Alphanumeric Keys
Key
Press Key Once
[1]
A
[2]
D
[3]
G
[4]
J
[5]
M
[6]
P
[7]
S
[8]
V
[9]
Y
Figure 1: Keypad Connections
Details
Press the [
] key to insert a blank
STAY
space in the current cursor position.
Press the [
] key to delete the
FORCE
character or blank space found at the
current cursor position.
Press the [
] key to delete all
ARM
characters and spaces to the right of the
cursor and at the cursor's position.
Press the [
] key to toggle the
DISARM
num eric keys to alphanum eric keys and
vice versa. N um eric: Keys [0] to [9]
represent num bers 0 to 9.
Alphanum eric: refer to Table 2.
Press the [
] key to toggle from low er
BYP
to upper case and vice versa.
After pressing the [
] key, the cursor
MEM
w ill turn into a flashing black square.
U sing Table 3, enter the 3-digit num ber
for the desired special character.
Press Key Three
Press Key Twice
Times
B
E
H
K
N
O
Q
T
W
Z
C
F
I
L
R
U
X
Table 3: Special Characters
Figure 2: Connections to Access Keypad