Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Catatan Instalasi - Halaman 10

Jelajahi secara online atau unduh pdf Catatan Instalasi untuk Beralih Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 46 halaman. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Juga untuk Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Catatan Instalasi (14 halaman), Panduan Solusi (17 halaman), Buku Putih (19 halaman), Deskripsi (1 halaman), Buletin Produk (6 halaman), Pemberitahuan (4 halaman), Lembar data (9 halaman), Lembar data (18 halaman), Buku Putih (18 halaman), Panduan Konfigurasi (8 halaman), Catatan Instalasi (28 halaman), Panduan Pemecahan Masalah (11 halaman), Catatan Instalasi (18 halaman), Panduan Pengguna (17 halaman), Catatan Instalasi (24 halaman), Manual (19 halaman), Catatan Instalasi (36 halaman)

Removing a CFC or DFC Daughter Card

Figure 1

CFC Daughter Card Installation Hardware

Cap nuts (2)

Card removal

tabs (2)

CFC daughter card

Heat sinks

Screws (3)

WS-X5530

To unseat the CFC daughter card from the Ethernet module, hold each tab at the rear of the CFC daughter

Step 5

card between your thumb and index finger, and gently press down on both tabs until the connectors are

unseated. (See

Figure

2.)

Caution

Do not apply too much pressure on the tabs because you might cause damage to the module.

Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules Installation Note

78-15893-08