Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Catatan Instalasi - Halaman 25

Jelajahi secara online atau unduh pdf Catatan Instalasi untuk Beralih Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 46 halaman. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Juga untuk Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Catatan Instalasi (14 halaman), Panduan Solusi (17 halaman), Buku Putih (19 halaman), Deskripsi (1 halaman), Buletin Produk (6 halaman), Pemberitahuan (4 halaman), Lembar data (9 halaman), Lembar data (18 halaman), Buku Putih (18 halaman), Panduan Konfigurasi (8 halaman), Catatan Instalasi (28 halaman), Panduan Pemecahan Masalah (11 halaman), Catatan Instalasi (18 halaman), Panduan Pengguna (17 halaman), Catatan Instalasi (24 halaman), Manual (19 halaman), Catatan Instalasi (36 halaman)

Figure 15

Step 4

Ensure that the connectors on the DFC3 are aligned with the connectors on the module.

the connectors on the underside of the DFC3.

Figure 16

Apply pressure to the area shown in

Step 5

78-15893-08

Male Standoff Locations on the WS-X67xx Modules

WS-X5530

DFC3 Daughter Card Connectors (Underside of DFC Daughter Card Shown)

Figure 17

Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules Installation Note

Installing the DFC3B and DFC3C Daughter Cards

Male standoffs

Connectors

to seat the power connector.

Figure 16

shows