DigiPos DS-820 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer DigiPos DS-820. DigiPos DS-820 13 halaman.

Halaman Cetak

2-4. Adjustment of paper width

1. Please adjust the Paper Guide to fit to the paper width as the direction of arrow.
2. Tight the screw after adjusting the Paper Guide.
3. Pull the edge of paper once the paper roll is installed correctly and close the Paper Cover.
12

3. Control panel and other functions

3-1. Control panel

You can control the basic paper feeding operations of the printer with the button on the control panel.
The indicator lights help you to monitor the printer' s status.
Control Panel
Button
The button can be disabled by the ESC c 5 command.
Press the FEED button once to advance paper one line. You can also hold down the FEED button to
feed paper continuously.
3-2. Error indicators
This section explains the different patterns signaled by the three LED indicators located on the top
cover of the printer.
PAPER
ERROR
POWER
STATUS
RED
RED
GREEN
Power off
OFF
OFF
OFF
Power on
OFF
OFF
ON
On line
OFF
OFF
ON
Cover open
OFF
ON
ON
Paper empty
OFF
ON
ON
Paper near end
ON
OFF
ON
Test mode
OFF
OFF
ON
REMARKS
Normal power is not supplied to
the printer
Normal power is supplied to the
printer
Normal error-free mode
Close cover
Insert new paper roll
Paper is low
Ignored error led
13