Cisco 7000 Manual - Halaman 4

Jelajahi secara online atau unduh pdf Manual untuk Beralih Cisco 7000. Cisco 7000 13 halaman. Front chassis panel and led board and replacement

4Cisco 7000 Front Chassis Panel and LED Board and Replacement

The LED board is mounted to the backplane on a horizontal plane near the top of the

chassis interior (shown edge-on in Figure 3). The board slides into two brackets

mounted to the front of the backplane, and a connector on the rear of the LED board

mates with a connector on the backplane.

LED board

(mounted on horizontal

plane in chassis)

Figure 3

Cisco 7000 Internal Chassis Components, Front View

Two pins in the brackets and a metal spring that butts up against the ceiling of the chassis

keep the board in place (see Figure 4). You must remove the top front chassis panel to

access the LED board. Carefully follow the top front chassis panel removal instructions

to avoid damaging the LEDs or the LED board.

LED board spring

LEDs

Arbiter board

connector

Blower power

connection

Blower air ducts to

interface processor

compartment