Cisco 7000 and 7507 LED Board MAS-7KLED Manual - Halaman 4
Jelajahi secara online atau unduh pdf Manual untuk Beralih Cisco 7000 and 7507 LED Board MAS-7KLED. Cisco 7000 and 7507 LED Board MAS-7KLED 13 halaman. Front chassis panel and led board and replacement
Juga untuk Cisco 7000 and 7507 LED Board MAS-7KLED: Manual Petunjuk Penggantian (21 halaman)
Halaman Cetak
4Cisco 7000 Front Chassis Panel and LED Board and Replacement
The LED board is mounted to the backplane on a horizontal plane near the top of the
chassis interior (shown edge-on in Figure 3). The board slides into two brackets
mounted to the front of the backplane, and a connector on the rear of the LED board
mates with a connector on the backplane.
LED board
(mounted on horizontal
plane in chassis)
Figure 3
Cisco 7000 Internal Chassis Components, Front View
Two pins in the brackets and a metal spring that butts up against the ceiling of the chassis
keep the board in place (see Figure 4). You must remove the top front chassis panel to
access the LED board. Carefully follow the top front chassis panel removal instructions
to avoid damaging the LEDs or the LED board.
LED board spring
LEDs
Arbiter board
connector
Blower power
connection
Blower air ducts to
interface processor
compartment