Cisco 9124 - mds multilayer fabric switch Panduan Konfigurasi - Halaman 45

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Beralih Cisco 9124 - mds multilayer fabric switch. Cisco 9124 - mds multilayer fabric switch 49 halaman. Mds 9000 series
Juga untuk Cisco 9124 - mds multilayer fabric switch: Spesifikasi (2 halaman), Lembar data (9 halaman), Spesifikasi (3 halaman), Catatan Rilis (48 halaman), Catatan Rilis (44 halaman), Catatan Rilis (36 halaman), Catatan Rilis (22 halaman), Catatan Rilis (3 halaman), Catatan Rilis (40 halaman), Manual (16 halaman), Panduan Pemasangan Perangkat Keras (36 halaman)

Figure 41 Disabling a port

Click Submit

Verifying VLAN settings

After disabling the XConnects, verify that each port used in the iSCSI setup is enabled and is part

of the same VLAN. To verify:

From Windows Start, select Run.

Enter "telnet" in the Run dialog box.

NOTE:

All ports are members of the same VLAN and are in VLAN 1 by default.

Verify the VLAN settings for Interconnects A and B.

Figure 42 Interconnect telnet session

Conﬁguring p-Class Blade GbE2 server enclosure interconnects

This section describes a conﬁguration example using GbE2 interconnects. For details on the conﬁguration

or installation of the interconnects, see the speciﬁc Blade server documentation.

Setup

Using the setup instructions in the HP ProLiant BL p-Class GbE2 Interconnect Switch Application Guide,

enable the Browser-Based Interface (BBI). Access the conﬁguration management and operation features of

the switch through the BBI and your Web browser. Use the web interface to disable the cross connection

(Figure

41).

(Figure

42).

C-Series iSCSI