Cisco Aironet 1000 Series Tingkatkan - Halaman 23

Jelajahi secara online atau unduh pdf Tingkatkan untuk Beralih Cisco Aironet 1000 Series. Cisco Aironet 1000 Series 28 halaman. Install and upgrade internal modules and field replaceable units
Juga untuk Cisco Aironet 1000 Series: Panduan Penyebaran (40 halaman), Manual (20 halaman)

Halaman Cetak

Install and Upgrade Internal Modules and Field Replaceable Units

Step 1

Pick up the C-Bracket (700-121628-01), place the bracket and then fix it on the wall using four screws.

Step 2

Assemble the USB cable (74-122795-01), dongle and antenna (07-100470-01) together. Pick up the wall-mount bracket

(700-121609-01), two SCREWS (48-0580-01). Align and fasten the screws (recommended torque is 10-12 in-lb), the

wall-mount is complete.

Connect the Antenna to the Device

Step 1

Ensure the reserved USB cable length is sufficient to reach the device.

Step 2

Ensure the use the cable clip within USB cable kit (74-122795-01) to manage cable routing and to hold the cable weight.

Step 3

Ensure there are no sharp radius within the USB cable routing.

Install and Upgrade Internal Modules and Field Replaceable Units