DigiPower RTC-1000 Petunjuk Pengoperasian - Halaman 3

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian untuk Pengisi Daya Baterai DigiPower RTC-1000. DigiPower RTC-1000 3 halaman. Travel charger

Halaman Cetak
Operating instructions:
1. while the battery is on the charger, connect the base charger to a power source.
The LCD panel will light up.
The LCD's charge indicator bars will begin to appear to show the battery charge level.
The bars will begin to blink at start of each charging level.
Less than 25% capacity the 1
Less than 50% capacity the 2
Less than 75% capacity the 3
Less than 100% capacity the 4th (100%) bar will blink.
When the battery is fully charged, all four bars will light but stop blinking; and a beeping alarm will sound.
After 75 seconds, the LCD will turn off.
(Typical charge time is 1-hour for batteries up to 900mAh.)
NOTE:
The charger or battery may become warm when charging. This is normal.
Maintenance:
Use a clean, DRY cloth when necessary to keep the metal contacts of both charger and battery clean.
(Remove from power outlet before cleaning)
LIMITED WARRANTY:
This product carries a full one-year warranty from date of purchase against defects in materials and workmanship.
This warranty does not cover damage resulting from accidents, misuse, unauthorized repair/alternations to the
product or failure to follow operating instructions.
Visit our web site
email:
st
(25%) bar will blink.
nd
(50%) bar will blink.
rd
(75%) bar will blink.
www.digipowersolutions.com