Cisco AJ732A - MDS 9134 Fabric Switch Panduan Konfigurasi - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Beralih Cisco AJ732A - MDS 9134 Fabric Switch. Cisco AJ732A - MDS 9134 Fabric Switch 49 halaman. Converged network switches for nx-os 4.0(1a)n1(1)
Juga untuk Cisco AJ732A - MDS 9134 Fabric Switch: Catatan Rilis (48 halaman), Catatan Rilis (44 halaman), Catatan Rilis (44 halaman), Catatan Rilis (36 halaman), Catatan Rilis (26 halaman), Catatan Rilis (22 halaman), Panduan Referensi Cepat (14 halaman), Catatan Rilis (3 halaman)

Halaman Cetak

Cisco AJ732A - MDS 9134 Fabric Switch Panduan Konfigurasi

During setup, the install procedure places a Microsoft iSCSI Initiator icon

desktop as well as in the control panel. The Microsoft iSCSI Initiator also has a CLI. Refer to the user

guide for more information.

Figure 3 Microsoft iSCSI Initiator icon

To install the Microsoft iSCSI Initiator:

Double-click the Microsoft iSCSI Initiator icon to open the iSCSI Initiator Properties window

(Figure

4).

Figure 4 iSCSI Initiator Properties window

Click Add to add the IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module

(14/2),, or MDS 9216i switch iSCSI Ethernet address to the initiator.

The Add Target Portal window appears

NOTE:

This example uses the GbE address (33.33.33.170).

Figure 5 Add Target Portal window

Enter the appropriate information in the following boxes:

• IP address or DNS name

(Figure

5).

(Figure

3) on the server

C-Series iSCSI