Cisco AJ732A - MDS 9134 Fabric Switch Panduan Konfigurasi - Halaman 35

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Beralih Cisco AJ732A - MDS 9134 Fabric Switch. Cisco AJ732A - MDS 9134 Fabric Switch 49 halaman. Converged network switches for nx-os 4.0(1a)n1(1)
Juga untuk Cisco AJ732A - MDS 9134 Fabric Switch: Catatan Rilis (48 halaman), Catatan Rilis (44 halaman), Catatan Rilis (44 halaman), Catatan Rilis (36 halaman), Catatan Rilis (26 halaman), Catatan Rilis (22 halaman), Panduan Referensi Cepat (14 halaman), Catatan Rilis (3 halaman)

Halaman Cetak
Cisco AJ732A - MDS 9134 Fabric Switch Panduan Konfigurasi
Figure 27 Both C-Series switches are target portals
C-Series switch side: configuring transparent-mode static mapping
The iSCSI-enabled C-Series switches have two modes of mapping IP addresses:
•
Transparent-mode dynamic mapping
•
Transparent-mode static mapping
You must enable static mapping for each iSCSI Initiator for persistent LUN mapping from the Fibre
Channel storage controller.
1.
Using the Cisco Device Manager, select IP > iSCSI from the menu bar.
The IP iSCSI window opens
Figure 28 IP iSCSI window
2.
Clear the Discovery Dynamic check box
(Figure
28).
(Figure
29).
C-Series iSCSI
35