Limitations and Restrictions
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Java Web Start
When using Java Web Start, it is recommended that you do not use an HTML cache or proxy server. You
can use the Java Web Start Preferences panel to view or edit the proxy configuration. To do this, launch
the Application Manager, either by clicking the desktop icon (Microsoft Windows), or type ./javaws in
the Java Web Start installation directory (Solaris Operating Environment and Linux), and then select
Edit> Preferences.
If you fail to change these settings, you may encounter installation issues regarding a version mismatch.
If this occurs, you should clear your Java cache and retry.
VRRP Availability
The Virtual Router Redundancy Protocol (VRRP) is not available on the Gigabit Ethernet interfaces on
the MSM-18/4 module or module 1 of the MDS 9222i switch, even though it is visible on these modules.
The feature is not implemented in the current release.
Using a RSA Version 1 Key for SSH Following an Upgrade
For security reasons, NX-OS Release 4.2(1a) does not support RSA version 1 keys. As a result, if you
upgrade to NX-OS Release 4.2(1a) from an earlier version that did support RSA version 1 keys, and you
had configured a RSA version 1 key for SSH, then you will not be able to log in through SSH following
the upgrade.
If you have a RSA version 1 key configured for SSH, before upgrading to NX-OS Release 4.1(3a), follow
these steps:
Disable SSH.
Step 1
Create RSA version 2 DSA keys.
Step 2
Step 3
Enable SSH.
Step 4
Delete any RSA version 1 keys on any remote SSH clients and replace the version 1 keys with the new
version 2 keys from the switch.
Proceed with the upgrade to NX-OS Release 4.2(1a).
If you upgrade before disabling SSH and creating RSA version 2 keys, follow these steps:
Open a Telnet session and log in through the console.
Step 1
Step 2
Issue the no feature ssh command to disable SSH.
Step 3
Issue the ssh key rsa 1024 command to create RSA version 2 keys.
Step 4
Issue the feature ssh command to enable SSH.
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.2(1a)
36
OL-19964-02
Halaman Cetak