Cisco ASR-920-4SZ-A Panduan Pemasangan Perangkat Keras - Halaman 15
Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Beralih Cisco ASR-920-4SZ-A. Cisco ASR-920-4SZ-A 46 halaman. Aggregation services router
Juga untuk Cisco ASR-920-4SZ-A: Panduan Konfigurasi (13 halaman)
Halaman Cetak
Chapter 1
Cisco ASR 920 Series Aggregation Services Router Overview
Table 1-1
Specification
Airflow
Cable access
System throughput
Power Supply
Modularity
Redundant
AC
Power
Specification
DC
Power
Specification
Operating
Temperature
Alarms
TDM Support
Mounting option
Port Configuration
Port Numbering
OL-32751-01
Cisco ASR-920-12CZ and Cisco ASR-920-4SZ Router Specifications (continued)
ASR-920-12CZ-A/ASR-920-12CZ-D
Front to back
Front cable access
32 Gbps
None
Yes
Yes
115 W
Yes
110 W
–40º C to 70º C
When using Smart SFPs, the
Note
systems should not operate
beyond 40º C.
The temperature range will
Note
vary for supported SFP/SFP+
installed on the router. See the
corresponding SFP/SFP+
documentation for more
details.
4 alarm dry contact inputs
•
(normally open)
LED indicators for critical, major
•
and minor alarms
None
•
Front or rear rail 19 inches or 23
inches
•
ETSI 300 mm cabinet
•
Wall Mount (with only side
mount option).
Note
For more information, see
Wall Mounting the
Cisco ASR 920 Series Router
, page
3-9.
12x1G and 2x10G/1G ports
4x1G SFP – Port [0:3]
8x1G Combo – Port [4:11]
2x10G – Port [12-13]
Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide
Cisco ASR 920 Router Features
ASR-920-4SZ-A/ASR-920-4SZ-D
Front to back
Front cable access
42 Gbps
None
Yes
Yes
105 W
Yes
105 W
–40º C to 70º C
When using Smart SFPs, the
Note
systems should not operate
beyond 40º C.
The temperature range will
Note
vary for supported SFP/SFP+
installed on the router. See the
corresponding SFP/SFP+
documentation for more
details.
4 alarm dry contact inputs
•
(normally open)
LED indicators for critical, major
•
and minor alarms
None
•
Front or rear rail 19 inches or 23
inches
•
ETSI 300 mm cabinet
•
Wall Mount (with only side
mount option)
Note
For more information, see
Wall Mounting the
Cisco ASR 920 Series Router
, page
3-9.
2x1G and 4x10G/1G ports
2x1G Copper – Port [0:1]
4x10G – Port [2-5]
1-5