BYOC 10-band graphic equalizer Petunjuk Manual - Halaman 5

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Pedal Musik BYOC 10-band graphic equalizer. BYOC 10-band graphic equalizer 14 halaman.

Populating the Circuit board

Before you start, make note that there are 3 typos on the PCB silk screening highlighted here

in yellow. The 1M resistor should be a 2.2M, the 220pf cap should be a 180pf, and the

.0082uf cap should be a .0068uf.

Step 1: Add the resistors. Resistors are not polarized and can go in either direction.

Remember to use the 2.2m resistor in place of the 1M.