Accustic Arts AMP I MK 2 Manual - Halaman 7

Jelajahi secara online atau unduh pdf Manual untuk Penguat Accustic Arts AMP I MK 2. Accustic Arts AMP I MK 2 10 halaman.
Juga untuk Accustic Arts AMP I MK 2: Manual (14 halaman)

Halaman Cetak

5.4 Connection to mains power

Only connect the power amplifier to the mains power when all the other cable connections have

already been carried out.

Plug in the mains cable firstly in the inlet connector socket 1 of the power amplifier and only then the

earthing pin-plugs in the mains socket.

By actuating the mains power switch 3, you can switch the unit on or off.

5.5 Replacing a damaged mains fuse

Replace fuses only with original types having the same ampere value, the same voltage endurance

and the same time-lag.

Never use fuses with other ampere classes or time-lag classes.

IMPORTANT!

Pull out the mains plug!

Always disconnect the unit from the mains power before replacing a fuse.

To change the fuse 2 please use a screwdriver suitable for the slot in the fuse holder. Press the

screwdriver lightly into the slot and only then turn anticlockwise. Now you can take out the fuse holder

and replace the fuse.

For countries with 220- 240 V / 50- 60 Hz

please use the following fuse types:

Fuse: 4 A – time lag

6 Start-up

Fig. 2: Front panel

PROTECT: LED (red) indicates error on the right output stage channel

ON: LED (blue) indicates ready for operation

PROTECT: LED (red) indicates error on the left output stage channel

For countries with 100-120 V / 50- 60 Hz

please use the following fuse types:

Fuse: 8 A – time lag