Accustic Arts Power ES Manual - Halaman 5

Jelajahi secara online atau unduh pdf Manual untuk Penguat Accustic Arts Power ES. Accustic Arts Power ES 13 halaman.

SURROUND: Unbalanced input (RCA) configured as "SURROUND BYPASS"

(before use, please see chapter 5.3)

Earth contact e.g. for a shielded speaker cable like the ACCUSTC ARTS

PREMIUM LINE – MK 2

Fig. 2: Front view

Description of Fig. 2:

IN 1 – IN 2 – IN 3 – IN 4 – SURR.: (SURR. = SURROUND-BYPASS)

Rotary switch to select input of reproduction device

REMOTE: Infrared remote control receiver for volume control

ON: LED (blue) indicates unit is ready for operation

PROTECT: LED (red) indicates unit is in protection mode; the transmission of a music signal

to the connected loudspeaker is interrupted

VOLUME: Rotary potentiometer for volume setting

5.1 Connection to mains power

Only connect the POWER ES to the mains power when all the other cable connections have already

been carried out.

Plug in the mains cable firstly in the inlet connector sockets of the unit and only then the earthing pin-

plug in the mains socket.

By actuating the mains power switch 1 you can turn on or turn off your unit.

5.2 Use and start-up of an analog input