Cisco Catalyst 2960 Series Panduan Instalasi

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih Cisco Catalyst 2960 Series. Cisco Catalyst 2960 Series 27 halaman. Compact switches
Juga untuk Cisco Catalyst 2960 Series: Lembar data (16 halaman), Lembar data (11 halaman), Lembar data (9 halaman), Buletin Produk (3 halaman), Buletin Produk (5 halaman), Lembar data (21 halaman), Spesifikasi (2 halaman), Brosur & Spesifikasi (10 halaman), Lembar data (15 halaman), Lembar data (28 halaman), Brosur (17 halaman), Panduan Memulai (25 halaman)

Switch Installation

Read these topics and perform the procedures in this order:

•

For initial switch setup, assigning the switch IP address, and powering on information, see the switch

getting started guide on Cisco.com.

Preparing

•

This section includes the basic installation caution and warning statements. Read this section before you

start the installation procedure. Translations of the warning statements appear in the Regulatory

Compliance and Safety Information for the Catalyst 2960 and 2960-S Switches guide on the

documentation CD and online at Cisco.com.

Do not stack the chassis on any other equipment. If the chassis falls, it can cause severe bodily injury

Warning

and equipment damage. Statement 48

OL-19732-04

Preparing, page 1-1

Planning a Switch Stack, page 1-5

Installing the Switch, page 1-10

Connecting the FlexStack Cables, page 1-17

Installing the Power Cord Retainer (Optional), page 1-18

Installing SFP and SFP+ Modules, page 1-20

Connecting to SFP and SFP+ Modules, page 1-22

10/100 and 10/100/1000 PoE+ Port Connections, page 1-24

10/100 and 10/100/1000 Port Connections, page 1-26

Safety Warnings, page 1-1

Installation Guidelines, page 1-4

Box Contents, page 1-4

Tools and Equipment, page 1-4

C H A P T E R

Catalyst 2960-S Switch Hardware Installation Guide

1-1