Cisco Catalyst 2960-S Series Panduan Instalasi
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih Cisco Catalyst 2960-S Series. Cisco Catalyst 2960-S Series 27 halaman. Switch getting
Juga untuk Cisco Catalyst 2960-S Series: Lembar data (28 halaman), Memulai Manual (31 halaman)
Halaman Cetak
Switch Installation
Read these topics and perform the procedures in this order:
•
•
•
•
•
•
•
•
•
For initial switch setup, assigning the switch IP address, and powering on information, see the switch
getting started guide on Cisco.com.
Preparing
•
•
•
•
Safety Warnings
This section includes the basic installation caution and warning statements. Read this section before you
start the installation procedure. Translations of the warning statements appear in the Regulatory
Compliance and Safety Information for the Catalyst 2960 and 2960-S Switches guide on the
documentation CD and online at Cisco.com.
Do not stack the chassis on any other equipment. If the chassis falls, it can cause severe bodily injury
Warning
and equipment damage. Statement 48
OL-19732-04
Preparing, page 1-1
Planning a Switch Stack, page 1-5
Installing the Switch, page 1-10
Connecting the FlexStack Cables, page 1-17
Installing the Power Cord Retainer (Optional), page 1-18
Installing SFP and SFP+ Modules, page 1-20
Connecting to SFP and SFP+ Modules, page 1-22
10/100 and 10/100/1000 PoE+ Port Connections, page 1-24
10/100 and 10/100/1000 Port Connections, page 1-26
Safety Warnings, page 1-1
Installation Guidelines, page 1-4
Box Contents, page 1-4
Tools and Equipment, page 1-4
C H A P T E R
Catalyst 2960-S Switch Hardware Installation Guide
1
1-1