Cisco Catalyst 3130 Manual - Halaman 10

Jelajahi secara online atau unduh pdf Manual untuk Beralih Cisco Catalyst 3130. Cisco Catalyst 3130 42 halaman. Cisco systems catalyst blade switch getting started guide
Juga untuk Cisco Catalyst 3130: Panduan Memulai (34 halaman)

Halaman Cetak

Front Panel

• USB drive formatted with FAT32

• Boot kickstart image from ROMMON for discovery recovery purposes

• Copy files to and from workspace:/ and volatile:/ within local-mgmt. The most relevant files are:

• Platform bundle image upload using download image usbA:

The Type A USB port does not support Cisco Secure Package (CSP) image upload support.

Network Ports

The Secure Firewall 3100 chassis has a network module slot that supports the following network modules:

• 8-port 1/10-Gb SFP

• 8-port 1/10/25-Gb SFP

• 6-port 1-Gb SFP SX multimode hardware bypass

• 6-port 10-Gb SFP SR multimode hardware bypass

• 6-port 10-Gb SFP LR single mode hardware bypass

• 6-port 25-Gb SFP SR multimode hardware bypass

• 6-port 25-Gb SFP LR single mode hardware bypass

• 8-port 10/100/1000Base-T hardware bypass

Note

First supported on FTD 7.2.1 and ASA 9.18.2.

• 4-port 40-Gb QSFP

Note

First supported on FTD 7.2.1 and ASA 9.18.2.

Note

The 4-port 40-Gb and 8-port 25-Gb network modules are supported only on the 3130 and 3140.

Factory Reset Button

The Secure Firewall 3100 chassis has a recessed reset button that resets the system to the factory default.

All previous configuration is erased after pressing the button down for five seconds. The following

occurs:

Overview

• Core files

• Ethanalyzer packet captures

• Tech-support files

• Security module log files

Overview