Cisco Catalyst 3550 Series Manual - Halaman 10

Jelajahi secara online atau unduh pdf Manual untuk Beralih Cisco Catalyst 3550 Series. Cisco Catalyst 3550 Series 19 halaman. Ios software release 12.1(14)ea1
Juga untuk Cisco Catalyst 3550 Series: Panduan Solusi (17 halaman), Buletin Dukungan Produk (6 halaman), Lembar data (21 halaman), Pertanyaan dan Jawaban (9 halaman), Buletin Dukungan Produk (6 halaman)

Cisco - Connecting a Terminal to the Console Port on Catalyst Switches

number is CAB-S3-CONSOLE=.

Note: The auxiliary (AUX) port is not supported.

Figure: EIA/TIA-232 RJ-45 Adapter Cable Connector

Table E-1: Supervisor Engine III Console Port Pinouts RJ45-to-DB25 Adaptor Cable

RJ45 on Switch Console

(DTE) (Uses straight through

cable.)

1 RTS (looped to pin 8)

2 DTR

3 RxD

4 GND

5 GND tied to 4

6 TxD

7 DSR

8 CTS (looped to pin 1)

Table E-2: Supervisor Engine III Console Port Pinouts RJ45-to-DB9 Adaptor Cable

RJ45 on Switch Console (DTE)

(Uses straight through cable.)

1 RTS (looped to pin 8)

2 DTR

3 RxD

4 GND

5 GND tied to 4

6 TxD

7 DSR

8 CTS (looped to pin 1)

Configuring a Terminal for Attachment to the Console Port

Note: The console port is an asynchronous (Async) serial port; any device connected to this port must be

capable of asynchronous transmission.

http://www.cisco.com/warp/public/473/9.html (10 of 19) [9/4/2003 12:36:03 PM]

DB25 on Terminal (DTE)

6 DSR

2 TxD

7 GND

3 RxD

20 DTR

DB9 on Terminal (DTE)

6 DSR

3 TxD

5 GND

2 RxD

4 DTR