FIBARO Walli Outlet E Manual - Halaman 2
Jelajahi secara online atau unduh pdf Manual untuk Aksesori FIBARO Walli Outlet E. FIBARO Walli Outlet E 17 halaman. Outlet
Halaman Cetak
17/06/2019
Speci cations
Power supply
Rated load current
Active element
Recommended external overcurrent protection
For installation in boxes
Recommended wires
Operating temperature
Ambient humidity
Radio protocol
Radio frequency band
Max. transmitting power
Range
Dimensions
(Height x Width x Depth)
Compliance with EU directives
Radio frequency of individual device must be same as your Z-Wave controller. Check information on
the box or consult your dealer if you are not sure.
Important safety information
Read this manual before attempting to install the device!
Failure to observe recommendations included in this manual may be dangerous or cause a violation of the
law. The manufacturer, Fibar Group S.A. will not be held responsible for any loss or damage resulting from
not following the instructions of operating manual.
DANGER OF ELECTROCUTION!
The device is designed to operate in electrical home installation. Faulty connection or use may result
in re or electric shock.
https://manuals.fibaro.com/walli-outlet/
Walli Outlet - E/F | FIBARO Manuals
110-230V~ 50/60 Hz
16A – resistive loads
micro-gap relay μ
16A type B circuit breaker
Ø = 60mm, depth ≥ 50mm
cross-section area between 1.5-4.0mm ,
stripped 15.5-16.5mm of insulation
0–40°C
0–90% RH without condensation
Z-Wave (500 series chip)
868.0–868.6MHz; 869.7–870.0MHz
+6dBm
up to 50m outdoors
up to 40m indoors
(depending on terrain and building structure)
FGWOE-011: 86 x 86 x 48 mm
FGWOF-011: 86 x 86 x 51 mm
RoHS 2011/65/EU
RED 2014/53/EU
Back To Top
2
Back To Top
2/16