Cisco Catalyst 3560-CX Manual - Halaman 11
Jelajahi secara online atau unduh pdf Manual untuk Beralih Cisco Catalyst 3560-CX. Cisco Catalyst 3560-CX 27 halaman. Managing switch stacks
Juga untuk Cisco Catalyst 3560-CX: Ikhtisar Produk (15 halaman), Manual (24 halaman)
Halaman Cetak
Managing Switch Stacks
Be careful when using multiple CLI sessions to the active switch. Commands that you enter in one session
are not displayed in the other sessions. Therefore, it is possible that you might not be able to identify the
session from which you entered a command.
We recommend using only one CLI session when managing the switch stack.
How to Configure a Switch Stack
Configuring a Network Port as Stack Port
You can configure both 10G network ports and multigig ports as stack ports or configure one port as stack
port and retain another port as network port.
SUMMARY STEPS
1. enable
2. configure terminal
3. switch switch-number hstack-port stack-port
4. end
5. show switch horizontal-stack-ports
6. copy running-config startup-config
7. reload
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Step 3
switch switch-number hstack-port stack-port
Example:
Device(config)# switch 1 hstack-port 1
TenGigabitEthernet 1/0/1
Step 4
end
Example:
How to Configure a Switch Stack
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Configures the network port into a stack port .
After configuration, restart the switch for
Note
network port to become a stack port.
Returns to privileged EXEC mode.
Managing Switch Stacks
11