Digisol DG-GR4010 Panduan Instalasi Cepat - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Router Jaringan Digisol DG-GR4010. Digisol DG-GR4010 16 halaman. Gpon onu router with 1 pon and 1 giga port
Halaman Cetak
1. Installed on the desktop
Place the machine on a clean bench, this installation is relatively simple,
you can observe the following operation:
Ensure the smooth workbench.
●
Around the device enough space for heat dissipation.
●
Do not place objects on the device.
●
2. Mounted on the wall
The ONU equipment chasis has two cruciform recess, install two
●
screws in the wall in accordance to the position of the groove.
The original selected two mounting screws gently snap into recesses
●
aligned.
Slowly let go, so that the device under the support of the screw
●
hanging on the wall.
2:2 Panel Lights
LED
Mark
Power
Power
Optical
LOS
signal loss
Registration
REG
LINK/
Interface
ACT
System
SYS
Status
Description
On
The device is powered up
Off
The device is powered down
Blink
Device does not receive optical signals
Off
Device has received optical signal
On
The device is registered to the PON system
Off
Device is not registered to the PON system
Blink
Device registration is incorrect
Fast Blink Port is sending or/and receiving data
On
Port is connected properly (LINK)
Off
Port connection exception or not connected
Blink
Port is sending or/and receiving data (ACT)
On / Off
System is not running or fatal error
Blink
Normal running