FIBARO FGBHT-001 Panduan Memulai Cepat - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Termostat FIBARO FGBHT-001. FIBARO FGBHT-001 8 halaman. Heat controller. radiator thermostat.

Halaman Cetak

Resetting The Heat Controller to factory defaults

Fig. 8

Sensor pairing

Fig. 9

LED diode

1. Use the included key to press and

hold the button. When the LED

ring glows yellow, release the button

2. Click the button again immediately

to confirm

3. The device will reset to factory

defaults and will be put in Standby

Mode. Click the button to activate

it again

1. Use a coin to open the battery cover

by turning it counter-clockwise

2. Remove the sticker underneath

the battery. Use coin again to close

the battery cover

3. Press and hold the button on

The Heat Controller. When the LED

ring glows blue, release the button

and click again immediately to confirm

4. Click the button on the Temperature

Sensor, the LED diode will start

blinking blue

5. The LED ring on The Heat

Controller, will blink green 5 times

if the connection was successful