FIBARO FGDW-002-2 Panduan Pengoperasian - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sensor Keamanan FIBARO FGDW-002-2. FIBARO FGDW-002-2 16 halaman. Door/window sensor

Halaman Cetak

NOTE

Entering invalid value

of parameter will re-

sult in response with

Application Rejected

frame and not setting

the value.

NOTE

Parameter 2 values

may be combined, e.g.

1+2=3 means that in-

dications for opening/

closing and waking up

are enabled.

ADVAnCED PARAMETERS

#7: Advanced parameters

The Door/Window Sensor 2 allows to customize its operation to user's

needs. Settings are available in the FIBARO interface as simple op-

tions that may be chosen by selecting the appropriate box.

In order to configure the Door/Window Sensor 2 (using

the Home Center controller):

1. Go to the device options by clicking the icon:

2. Select the „Advanced" tab.

Wake up interval

Available settings: 0 or 3600-64800 (in seconds (1-18h), 3600s (1h)

step)

Default setting: 21600 (6h)

The Door/Window Sensor will wake up after each defined time inter-

val and always try to connect with the main controller. After a suc-

cessful communication attempt, the sensor will update configuration

parameters, associations and settings and will go into standby mode.

After failed communication attempt (e.g. lack of Z-Wave range) the

device will go into standby mode and retry to establish connection

with the main controller after the next time interval.

Setting wake up interval to 0 disables sending Wake Up notification

frame automatically. Wake up may be still performed manually by a

clicking one of the TMP buttons (while the other button is pressed).

Longer time interval means less frequent communication and thus a

longer battery life.

1. Door/window state

This parameter allows to set in what state is door/window when the

magnet is close to the sensor.

Available settings: 0 - closed when magnet near

Default setting:

2. Visual LED indications

This parameter defines events indicated by the visual LED indicator.

Disabling events might extend battery life.

Available settings: 1 - indication of opening/closing status change

Default setting:

1 - opened when magnet near

Parameter size:

2 - indication of wake up (1 x click or periodical)

4 - indication of device tampering

Parameter size:

1 [byte]