Crestron Horizon HZ-FP-G1 Mulai Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Mulai Cepat untuk Sistem Konferensi Crestron Horizon HZ-FP-G1. Crestron Horizon HZ-FP-G1 4 halaman.

HZ-FP-G Series

Faceplate for Horizon™ In-Wall Devices

HZ-FP-G2 Multigang Installation

Adjust the Faceplate

To ensure proper alignment of the HZ-FP-G Series faceplate over a

Horizon device, perform the following:

1. Remove the magnetic top and bottom trim pieces from the faceplate.

2. Using a #1 Phillips screwdriver through the holes in the faceplate,

loosen the integrated mounting screws that secure the keypad,

dimmer, or switch to the electrical box.

3. Ensure that the faceplate is properly aligned and tighten the screws.

4. Reattach the magnetic top and bottom trim pieces to the faceplate.

Quick Start