Sharp Aquos LC 32GD9E Panduan Pengoperasian - Halaman 18
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk TV LCD Sharp Aquos LC 32GD9E. Sharp Aquos LC 32GD9E 40 halaman. Lcd colour television
Halaman Cetak
Menu operations
Auto Search
You can automatically search for and download TV
channels by performing the procedure below. This is
the same function as from programme auto search to
preset download in Auto Installation.
1
Repeat steps 1 to 4 in Programme Setup.
2
Press c/d to select "Yes", and then press OK.
1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download
Manual Adjust
You can set some channel items manually.
[ Setup ... Programme Setup ]
MENU
Fine
[179.25]
Colour sys.
[AUTO]
Sound sys.
[B/G]
Label
[SAT.1]
Skip
[Off]
Decoder
[Off]
Lock
[Off]
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Programme Setup", and
then press OK.
If you have already set the PIN under "Child Lock",
enter it here.
• See page 17 for setting PIN.
4
Press a/b to select "Manual Adjust" and then
press OK.
5
Press c/d to select "Yes", and then press OK.
6
Press a/b/c/d to select the channel you want
to edit, and then press OK.
• The selected channel information displays.
7
Press a/b to select the desired menu item, and
then press OK.
8
Press a/b/c/d to select or adjust.
NOTE
• When you exit Programme Setup "Manual Adjust" menu,
preset download automatically runs if you change
information on that menu.
Fine
You can adjust the frequency to your desired position.
NOTE
• Adjust while checking the background picture as a
reference.
• Instead of pressing c/d to adjust the frequency in step
8 above, you can set by directly entering the frequency
number of the channel with 0–9.
EXAMPLE
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s OK.
16
179.25
MHz
Colour sys.
Select the optimum colour systems to receive. (AUTO,
PAL, SECAM)
Sound sys. (Broadcasting system)
Select the optimum sound systems (Broadcasting
systems) to receive. (B/G, D/K, I, L, L')
Label
When a TV channel sends its Network Name, the Auto
Installation detects the information and assigns a name
to it. However, you can change individual channel
names.
1
Repeat steps 1 to 7 in Manual Adjust.
2
Press a/b/c/d to select each character of the
new name for the channel, and then press OK.
3
Repeat step 2 above until the name is fully spelt
out.
• The name can be 5 characters or less.
• If a channel name is less than 5 characters, select
"END", then press OK.
Skip
Channels with "Skip" set to "On" are passed over when
using Pr/Ps even if selected while watching the
image from the TV.
Decoder
When connecting a decoder to the unit, you need to
select EXT1.
NOTE
• "Off" is factory preset value.
Lock
You can block the viewing of any channel.
NOTE
• See page 17 for setting PIN.
• When Lock is set to "On" for a channel, "Child lock has
been activated." displays, and the image and sound of
the channel are blocked.
• When pressing OK while "Child lock has been activated."
displays, PIN input menu will display. Inputting the correct
PIN lifts the child lock temporarily until the power is turned
off.
Sort
Channel positions can be sorted freely.
1
Repeat steps 1 to 4 in Programme Setup.
2
Press c/d to select "Yes", and then press OK.
3
Press a/b/c/d to select the channel you want
to move, and then press OK.
4
Press a/b/c/d to move it to the desired
position, and then press OK.
5
Repeat steps 3 and 4 until all desired channels
are sorted.