Sharp Aquos LC-19LE320E Panduan Pengoperasian - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk TV LCD Sharp Aquos LC-19LE320E. Sharp Aquos LC-19LE320E 32 halaman. Lcd colour television
Juga untuk Sharp Aquos LC-19LE320E: (Spanyol) Manual De Manejo (34 halaman)
Halaman Cetak
tV menu
Channel edit
E
Channel edit allows you to change the channel number
or the channel name.
1�
Press
menu on the remote control and select
tV ≥ Channels�
note
•
You are prompted to enter current password to enter
Channels if Channel Block /parental Guidance /
input Block in the parental menu is not the default
setting.
2�
Press
<> to select Channel edit and press
oK or ≥ to enter the channel list.
3�
Press
<> to select one channel you prefer to
edit.
4�
oK to enter.
Press
5�
Press
<> to highlight one of the following:
•
Channel number:
number by using the digit buttons on the
remote control
•
Channel name:
the remote control to rename the channel.
Please refer to the graphic below for available
characters. (Press each button repeatedly to
change between characters.)
0-9 digit buttons with available characters
ABC1
JKL4
STU7
Frequency:
Use digit buttons on the remote
•
control to enter the frequency. (Only for
analogue channels).
•
Colour System:
system. (Only for analogue channels)
•
Sound System:
system. (Only for analogue channels)
6�
Follow the on-screen instructions to exit.
note
•
The new channel number you have entered can not
override the exist one.
assign a channel decoder (For atV)
E
Decoders that decode channels can be connected
to SCART. You have to assign the TV channel as a
channel to be decoded. Before selecting channels,
make sure your TV is connected to SCART.
16
Enter a new channel
Press the digit buttons on
DEF2
GHI3
MNO5
PQR6
VWX8
YZ9
+-.0
Press ≤≥ to select the colour
Press ≤≥ to select the sound
1�
Press
menu on the remote control and select
tV ≥ Channels�
note
•
You are prompted to enter current password to enter
Channels if Channel Block /parental Guidance /
input Block in the parental menu is not the default
setting.
2�
Press
<> to select Decoder and press oK or
≥ to enter available analogue channel list.
3�
Press
<> to select the channel to decode.
4�
oK to mark or cancel.
Press
5�
Follow the on-screen instructions to exit.
analogue Ch Fine tune
E
You can manually fine tune analogue channels when
reception is poor.
1�
menu on the remote control and select
Press
tV ≥ Channels.
note
•
You are prompted to enter current password to enter
Channels if Channel Block / parental Guidance /
input Block in the parental menu is not the default
setting.
2�
Press
<> to select analogue Ch Fine tune
and press oK or ≥ to enter the analogue
channel list.
3�
Press
<> to select one channel and press oK
to enter.
4�
Press
≤≥ to adjust the frequency.
5�
When complete, press
The fine tuned channel is stored under the
current channel number.
6�
Follow the on-screen instructions to exit.
Clean Channel list
E
Select to clean all the channels that stored in the
channel list.
1�
Press
menu on the remote control and select
tV ≥ Channels�
note
•
You are prompted to enter current password to enter
Channels if Channel Block /parental Guidance /
input Block in the parental menu is not the default
setting.
2�
Press
<> to select Clean Channel list and
press oK or ≥ to enter.
3�
Select
oK and press oK on the remote control
to clean channel list.
oK to set the frequency.