Sharp Aquos LC-20SD4E Panduan Pengoperasian - Halaman 22

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk TV LCD Sharp Aquos LC-20SD4E. Sharp Aquos LC-20SD4E 30 halaman. Lcd colour television

Halaman Cetak
DTV menu operations

System Configuration

Configure On-Screen Display and Child Lock settings.

Display Setup

The On-Screen Display appearance and the position/
duration of the service banner information can be
customised.
1
Press c/d to select "System Configuration".
2
Press a/b to select "Display Setup", and then
press ENTER.
Display Setup
Banner timeout
Banner position
Display Transparency
Select
3
Press a/b to select the desired item.
4
Press c/d to select the desired parameter, and
then press EXIT.
OSD Setup
Selectable items
items
Banner
1 Sec/2 Secs/
timeout
... 7 Secs
Banner
Top/Bottom
position
Display
None/10%/20%/
Transparency
...50%

Password Setup (Parental lock)

This function allows TV and Radio services to be
restricted. It prevents children from watching violent
or sexual scenes that may be harmful.
1
Press c/d to select "System Configuration".
2
Press a/b to select "Password Setup", and then
press ENTER.
3
If you already set the PIN, enter it here. If not,
enter the factory preset PIN "0000".
4
Press a/b to select "Parental lock".
5
Press c /d to select the desired age/rating
(4 ...18/None).
Password Setup
Parental lock
Change password
Select
4 Secs
Bottom
10%
Adjust
D.Menu
Enter
Exit
Description
Select how long the service
banner information
appears on screen.
Select whether the service
banner information
appears on top or bottom
of the screen.
Select the desired level of
On-Screen Display
transparency.
None
- - - -
Adjust
D.Menu
Enter
Exit
6
Press a/b to select "Change password".
7
Enter the 4-digit number as a PIN using 0 – 9.
8
Enter the same 4-digit number as in step 7 to
confirm.
• "Successfully updated" displays.
9
Press EXIT.
NOTE
• To view a locked channel, you must enter a PIN. When
you select a locked channel, a PIN prompt message pops
up. Enter the 4 digit number using 0–9.
• As a precautionary measure, make a note of your PIN
on the back of this operation manual, cut it out and
keep it in a safe place that children cannot reach.
• See page 26 for resetting the current PIN to the factory
preset "0000" if you lose or forget your PIN.

Version

Check the version information of the digital module.
Press c/d to select "Version", and then press
ENTER.
• The hardware and software versions are displayed.

Software Upgrade (UK only)

1
Turn to a BBC channel first. Then press c/d to
select "Technical information".
2
Press a/b to select "Software upgrade", and then
press ENTER.
• "Confirmation" screen displays.
3
Press c/d to select "Yes", then press ENTER.
• If you select the option "Yes", then the Software
Upgrading process will be started. It will take about
20 minutes and after this process is complete the
TV will be rebooted automatically.
If you select the option "No" you can continue to
watch TV programmes.
NOTE
• This function is available when you select "United
Kingdom" in step 2 in "Initial auto installation". (page 7)
• During Software Updating process, do not turn off the TV,
and you cannot control any buttons.
• If you turn off the TV, disconnect the AC cord, or a power
failure occurs during Software Updating, the update will
fail, and you will not receive digital services.
If you turn on the TV again, "Software upgrade" screen
will be displayed, and update software again. If the
"Software upgrade" still fails, ask qualified service
personnel.
• After Software Updating process, the memory of Digital
Menu setting will be lost. Please do necessary resetting.
21