Sharp AQUOS LC-20SD5E Panduan Pengoperasian - Halaman 31

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk TV LCD Sharp AQUOS LC-20SD5E. Sharp AQUOS LC-20SD5E 35 halaman. Lcd colour television

Halaman Cetak
Appendix

Troubleshooting

Problem
•
No power.
•
Unit cannot be operated.
•
Remote control unit does not
operate.
•
Strange colour, light colour, or
dark, or colour misalignment.
•
Power is suddenly turned off.
•
No picture.
•
No sound.
•
The TV sometimes makes a
cracking sound.
Cautions regarding use in high and low temperature environments
•
When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
•
Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or
near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: –20°C to +60°C.
•
Check if you pressed
If the indicator on the TV lights up red, press
•
Is the AC cord disconnected? (See page 3.)
•
Check if you pressed
•
External influences such as lightning, static electricity, etc., may cause
improper operation. In this case, operate the unit after first turning the power
off, or unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
•
Are batteries inserted with polarity (+, −) aligned? (See page 4.)
•
Are batteries worn out? (Replace with new batteries.)
•
Are you using it under strong or fluorescent lighting?
•
Is a fluorescent light illuminating the remote control sensor?
•
Adjust the picture tone. (See page 10.)
•
Is the room too bright? The picture may look dark in a room that is too bright.
•
Check the colour system setting. (See page 13.)
•
The unit's internal temperature has increased.
Remove any objects blocking vent or clean.
•
Check the Auto power off setting. (See page 14.)
•
Is sleep timer set? Press SLEEP on the remote control unit until it sets to Off.
•
Is connection to other components correct? (See page 7.)
•
Is input signal type selected correctly after connection? (See page 12.)
•
Is the correct input source selected? (See page 5.)
•
Is picture adjustment correct? (See page 10.)
•
Is the antenna connected properly? (See page 3.)
•
Is the volume too low? (See page 5 and 6.)
•
Make sure that headphones are not connected. (See page 6.)
•
Check if you pressed
•
This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to change in temperature. This does not affect the TV's
performance.
Possible Solution
on the TV. (See page 8.)
on the remote control unit.
on the remote control unit. (See page 8.)
on the remote control unit. (See page 5.)
-29
GB