Sharp Aquos LC-32AX3X Panduan Pengoperasian - Halaman 30
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk TV LCD Sharp Aquos LC-32AX3X. Sharp Aquos LC-32AX3X 50 halaman. Lcd colour television
Halaman Cetak
Basic adjustment settings
Surround
When you set to On, you can enjoy surround sound,
the same as if you were in a movie theatre.
Using SURROUND on the remote control unit
Press SURROUND to switch the Surround function on
and off.
Selected item
On
Makes it possible to enjoy natural, realistic
surround sound.
Off
Outputs the normal sound.
Using Surround on the menu screen
You can produce Surround effects from the "Audio"
setting.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Audio".
3
Press a/b to select "Surround", and then
press ENTER.
[ Audio ... Surround ]
MENU
Audio
AV Mode
Treble
[0]
Bass
[0]
Balance
[0]
Surround
Reset
4
Press c/d to select "On", and then press
ENTER.
NOTE
• Audio menu items other than "AV Mode" are greyed out
when headphones are in use.
Description
Power Control
[STANDARD]
–15
+15
–15
+15
L
R
[Off]
Power control
Power control setting allows you to save energy.
No Signal off
When set to "Enable", the power will automatically shut
down if no signal inputs for 15 minutes.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Power control".
• Power control menu displays.
3
Press a/b to select "No Signal Off", and
then press ENTER.
4
Press c/d to select "Enable", and then
press ENTER
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• "Disable" is factory preset value.
• When a TV programme finishes, this function may not
operate.
No Operation off
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Power control".
• Power control menu displays.
3
Press a/b to select "No Operation Off", and
then press ENTER.
4
Press c/d to select "Enable", and then
press ENTER.
•
Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• "Disable" is factory preset value.
29