Sharp Aquos LC-32LE600S Panduan Pengoperasian - Halaman 26
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk TV LCD Sharp Aquos LC-32LE600S. Sharp Aquos LC-32LE600S 36 halaman. Téléviseur couleur à écran
Juga untuk Sharp Aquos LC-32LE600S: Panduan Pengoperasian (5 halaman), (Spanyol) Manual Del Usuario (36 halaman), (Bahasa Prancis) Mode D'emploi (36 halaman)
Halaman Cetak
Other useful features
Setting when using external
devices
Input source settings
Setup
Input Label
You can label each input source with a custom
description.
1
Press b to select the desired input source.
2
Go to "MENU" > "Setup" > "Input Label".
Press a/b/c/d to select each character of
3
the new name for the input source, and then
press ;.
4
Repeat until the label is fully spelt out.
NOTE
•
The label can be six characters or less.
•
When you want to set an input source label of less than six
characters, select "END" to set the name.
INPUT SOURCE
TV
EXT 1
DVD
EXT 3
NOTE
•
You cannot change labels if the input source is "TV".
Skipping specified inputs
Setup
Input Skip
This setting allows you to set the input source you want
to skip during "INPUT SOURCE" selection operations.
24
Reset
If complex adjustments are made so that the settings
cannot be restored to normal, you can reset the settings
to the factory preset values.
1
2
NOTE
•
CLEAR
BACK
Identification
END
You can check the TV ID on the screen for reporting to
customer service.
Software update
If you use DVB-T, the TV automatically receives the
update service and updates new software. When a
confirmation message is received about the software
update on the screen, follow the screen prompts.
CAUTION
•
CLEARING THE PIN
If you lose or forget your PIN, you can clear the PIN
following these steps.
1
2
[Yes]
[No]
[No]
NOTE
•
Setup
Reset
Go to "MENU" > "Setup" > "Reset".
Press c/d to select "Yes", and then press
;.
•
After the reset has completed, the power shuts off and
then comes back on. The screen will have returned to its
original settings.
PIN input is required when executing "Reset". The default
PIN is "1234". To change the PIN setting, refer to Password/
Parental lock settings (Page 22). To clear the PIN setting (PIN
input will no longer be needed), refer to CLEARING THE PIN
(Page 24).
Setup
Identification
Do not disconnect the AC cord when the software update
is in progress. If you have the problem, ask qualified service
personnel.
Go to "MENU" > "Setup" > "Child Lock".
Enter the four-digit number on page 32 to
clear your PIN.
As a precautionary measure, make a note of your PIN on the
back of this operation manual, cut it out and keep it in a safe
place that children cannot reach.