Sharp Aquos LC-32WD1E Panduan Pengoperasian - Halaman 18
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk TV LCD Sharp Aquos LC-32WD1E. Sharp Aquos LC-32WD1E 38 halaman. Aquos lcd colour television
Juga untuk Sharp Aquos LC-32WD1E: Panduan Pengoperasian (38 halaman)
Halaman Cetak
Menu operations (main)
Setup Menu
Language
Menu Operation: A (page 12)
The Language setting selects the on-screen display
language. Refer to "Specifications" on page 31 for a list of
available languages.
Country
Menu Operation: A (page 12)
The Country setting selects the country or region. It
specifies settings specific to your country or region, such
as the frequency list when doing auto channel scans.
Installation
The Installation setting allows you to setup the analogue
TV channels manually.
1
Press
2
Press MENU. The TV Menu screen displays.
3
Press
OK.
4
Press
If you have a PIN set in Child Lock, enter it now using
0–9. See page 17 for information.
5
Press
then press
setting.
Programme Selection
The Programme Selection setting selects the channel
that you want to modify. Enter the desired channel using
/ .
Downloaded from
www.Manualslib.com
to select the TV input source.
/
to select the Setup menu, and then press
/
to select Installation, and then press OK.
/
to select the desired setting option and
/ / /
and OK to select the desired
manuals search engine
Programme Name
The Programme Name setting allows you to change
channel names to a personalized name.
Use
/ / /
to enter each letter of the new name, and
then press OK.
NOTE:
•
The channel name can be six characters or less.
Tuner Frequency
The Tuner Frequency setting allows you to specify the
exact frequency for the channel. Enter the desired
frequency using
NOTE:
•
Adjust while checking the background picture as a
reference.
Example:
•
179.25 MHz: Press 1
•
49.25 MHz: Press 0
Skip
With the Skip setting set to "On", when scrolling through
channels, this channel will not be displayed.
Child Locked
The Child Locked setting blocks this channel by means of
a password PIN.
NOTE:
•
For information on Child Lock, see page 17.
TV only
Automatic Installation
The Automatic Installation setting searches for all
available analogue channels.
1
Press
/
to select this setting, and then press OK.
2
The auto search begins.
TV only
The TV performs a frequency scan to detect the TV
channels available on the network. During the
frequency scan, a TV channel with ACI (Automatic
Channel Installation) information may be detected.
ACI information is teletext-based information from the
channel source that describes the TV channels
(including channel labels and channel numbers)
available on the network.
3
If ACI information is detected, the ACI information will
be displayed on the screen. Press
correct region and then press MENU.
4
The Auto Installation will end and you are ready to
watch TV.
NOTE:
•
Press END to exit at any time.
/
or 0–9.
7
9
2
5
4
9
2
5
/
to select the
16