Sharp Aquos LC-40L500X Panduan Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk TV LCD Sharp Aquos LC-40L500X. Sharp Aquos LC-40L500X 32 halaman. Lcd colour television

Halaman Cetak

Attaching the stand

• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.

• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being

damaged.

Conﬁ rm the screws supplied with the TV.

Screws ( m 4)

(used in step 3)

Insert the stand base to the stand post on the

bottom of the TV. ( 1 )

Insert and tighten the 4 screws into the 4 holes

on the bottom of the stand base. ( 2 )

NOTE

• To detach the stand, perform the steps in reverse order.

CAUTION

• Adjust the screen with both hands. Put one hand on

the TV and rotate the screen while steadying the stand

with your other hand.

The TV can be rotated up to 15 degrees to the right or left.

Setting the TV

Connecting the antenna cable

To enjoy a clearer picture, use an outdoor antenna.

Standard DIN45325 plug (IEC169-2)

75-ohm coaxial cable (round cable)

Room antenna terminal

(75-ohm type)

CAUTION

• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE

AC CORD CONNECTED.

15°

Antenna cable

(commercially available)

Connecting the AC cord

To AC INPUT

terminal

To antenna

terminal

Soft cushion

Screw

Screw driver