Sharp 14LT-45C Panduan Pengoperasian - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk TV Sharp 14LT-45C. Sharp 14LT-45C 25 halaman.
Juga untuk Sharp 14LT-45C: Panduan Pengoperasian (24 halaman), Panduan Pengoperasian (Ceko) (26 halaman)

Halaman Cetak

Programme item is used in order to store the channels after

Autostore, as from a required programme. In default the pro-

gramme number is set to the following programme after the

last set programme. By using or button the number

can be changed, in addition to change number digit button or

double digit button can be used too.

If your TV has more then one Standard option you may

change it by using or button to BG, DK or L/L on

STANDARD item.

To cancel AUTOSTORE before starting, press

To select START use or button and press or

button. To cancel AUTOSTORE during running press

or button.

After Autostore is finalized, a programme list will apper on the

screen. In the programme list you will see the programme num-

bers and names assigned to the programmes.

If you do not accept the locations and/or the programme names

of programmes, you can change them in Programme menu.

Other Features

TV Status

Programme Number, Programme Name (or AV), (they

are displayed on the upper left of the screen) and Sleep

Timer (shows the time left on the upper right screen if en-

abled). They are displayed after programme change during 3

seconds.

Programme Number

Programme Name (5 characters)

These OSDs are displayed when a new programme is en-

tered by digit button, by pressing "

or - P/CH button, or by

Flash back (

This button is used to return to the previous viewed preset.

By pressing the "

gle between two presets.

Double-digit (- / - -)

This OSD is displayed when the "- / - -" button pressed in

place of the programme number indicator.

After then, in order to enter a programme it must be pressed

to two digit consecutively. When it is late to press any digit

button this function will be ignored and the display will be

erased. In the same way it must not be late to press any dig-

it button after entering the first digit. The limit of the delay

time is 3 seconds.

Picture Mode

The picture mode OSD is displayed below the sound indica-

tor.

Downloaded from:

http://www.usersmanualguide.com/

" button, or by P/CH+

button.

)

" button repeatedly it is possible to tog-

By pressing

be switched into 4:3, 16:9 or Auto(only AV1) mode.

Sleep Timer Last Minute Indicator

It is displayed on the upper right of the screen. If sleep timer

is activated it is displayed with the TV status and erased with

it after 3 seconds.

If there is left only one minute of the down counting of the

button.

timer, it is displayed automatically on the upper left of the

screen, and stayed there until finishing. Then TV goes auto-

matically to stand-by.

Sound Mute

To cut off the sound from the TV press button. To restore

the sound press the button again or use the

buttons, in this case the volume will start from mini-

mum setting.

No-Signal

No-Signal Timer Indicator

It is displayed in the middle of the screen when no valid sig-

nal detected. It shows the remained time for the switching to

the Stand-By mode (it takes 5 minutes when any signal de-

tected or no any Remote Control command is accessed).

The indicator is displayed in 3 seconds when there is no valid

signal.

After an Remote Control command (if No-Signal Timer is ac-

tive) the timer stops and if no signal detected again the timer

is initialized to 5 minutes and starts 3 seconds later again to

count down.

It is not valid in AV mode.

Blue Background During No-Signal

In case, no valid signal is detected (in TV or AV mode) Blue

Background is activated.During search process Blue Back-

ground is not active. But instead of it there is another feature

given; the semi-transparent menu background is made blue.

Volume Bar

It is displayed in the lower middle of the screen. When a vol-

ume command is received (pressing

mote Control or Front panel) and no menu is active, it stays

on the screen for 3 seconds, after the last volume command

or until another command is received in between.

AV Modes

By pressing the

modes (except being in Teletext). Pressing this button con-

secutively will switch the TV in one off the AV modes:

SCART or RGB.

SCART supports the RGB mode. But if there is some colour

problem in SCART modes, please force the AV mode to RGB

mode.

In order to quit the AV mode press the

- 12 -

wide mode button, the picture mode can

+ or -

(;7

button you can switch your TV to AV

button.

+ or

by Re-