Fiberdyne Labs FHC-1080 Manual

Jelajahi secara online atau unduh pdf Manual untuk Konverter Media Fiberdyne Labs FHC-1080. Fiberdyne Labs FHC-1080 5 halaman. Fhc 10/100 series

Http://www.fiberdyne.

Overview

The Fiberdyne Labs FHC 10/100

total cost of ownership when you are extending legacy twisted-pair network to a fiber-optic backbone. It is primarily

designed for larger and higher bandwidth demanding workgroups that require expansion of the Ethernet network.

The 10/100Mbps media converter series features a RJ45 jack and ST/SC fiber optic connectors, connecting the

10/100Mbps network to the 100BASE-FX (fiber optic) network. At full duplex mode, the converter can extend

distance up to 2 kilometers for multimode fiber and up to 100 kilometers for single mode fiber, maximize conversion

options and network design flexibility.

FCC warning

The F H C 1 0 / 1 0 0 series media converter have been tested and found to comply with the limits for a Class

A digital device, pursuant to Part 15 of the FCC Rules. These standards are designed to provide reasonable

protection against harmful interference when these devices are operated in commercial environment These

devices can use, generate and radiate radio frequency energy and may cause harmful interface to radio

communications unless installed in accordance with this User's Guide. Operation of this device in a residential area

is likely to cause harmful interface which will make the user responsible for the appropriate remedial action at

his/her own expense.

CE mark Warning

These are Class A products. In a domestic environment these products may cause radio interface in which case the

user will need to consider adequate preventative measures.

Package Content

Thank you for purchasing our Ethernet Media Converter. Before you start installing the Media Converter, verify the

following items in the package

o Media Converter

o User's Manual

o Power Adapter

Features

Compliant with IEEE802.3 10Base-T, and IEEE802.3u 100Base-TX/FX standards

·Support auto-negotiation function in TP port to detect speed (10/100M) and duplex mode (full/half) automatically

· Support auto uplink (auto MDI/MDI-X) in TP port, no more cross-over cable

· Extend fiber-optic distance up to 100km with single mode fiber

· Provide various fiber-optic interfaces with ST/SC/FC connectors

· Mountable in the FHC-4000 converter chassis (optional card package)

New features (optional)

· Auto Uplink: User can connect to PC or switch/hub by using either straight-through or cross-over

127 Business Park Drive

Frankfort, NY 13340 USA

TEL: (800) 894-9694 FAX: (315) 895-8436

Http://www.fiberdyne.com

com

Series

Media Converter makes it possible to mix network media to optimize

FHC 10/100 Series Media Converter

Version 1.0 July 2015

Page 1